Español
Français
Deutsch
Italiano
Português
Shopping cart
Filter
Loading...
Functional Swords Category B
One-handed Combat Viking Sword
Ref. 51968
Hand-crafted replica of a functional Viking single-handed sword from the 11th century. The high-quality spring steel blade is oil-tempered up to 48-50° Rockwell. Includes leather-wrapped wooden scabbard with two straps with buckles. The grip is covered with leather. It is not sharpened and the point is rounded.
Functional Gladius Pompeii
Ref. 51634
Pompeii functional sword with high carbon steel 1065 blade and wooden hilt. Scabbard in wood covered with metal and leather.
Practical Cup Hilt Rapier
Ref. 50625
The rapier blade is similar in design to the practical blades for the swept-hilts but the length of the tang is adapted to the cup-hilt.
Combat sword one hand balanced
Ref. 4087
Short Sword for professional fighting, one hand and balanced, with carbon steel blade and temperate between 58 and 60 HRC hardness. Handle made of steel and brown leather. Offer sheet hardness and impact flexibility. Length 94 cm and weight 1 kg.
Sword one hand and half balanced
Ref. 4090
Professional fight one hand sword. Balanced, with carbon steel blade and temperate between 58 and 60 HRC hardness. Handle made of steel and brown leather. The blade offers great hardness and impact flexibility. Sword length 125 cm and weight 1.5 kg.
Taza Cup-Hilt Rapier
Ref. 50573
Functional cup-hilt rapier sword with a sharp blade. Made of carbon steel with a total length of 117,5 cm. 87,2 cm. blade and 936 gr. weight. Blade width 1,9 cm/1 cm. blade thickness 6.4 mm/2.5 mm, including leather scabbard.
Practical Single-hand Sword
Ref. 50580
The grip is permanently mounted and the tang is riveted for safety. The blade is fullered for balance and features 1/16" edges and a rounded tip. The scabbard is fabricated in a glass-filled resin, to provide great impact resistance, to eliminate swelling and to minimise blade corrosion problems. The wood grain finish is attractive, but is left unfinished...
Practical Viking Sword, blunt
Ref. 50585
This very affordable piece features authentic hilt styling, with a fully tempered un-edged and un-pointed blade, and is made to withstand rugged use while providing the level of safety required by many of today´s re-enactment societies.
Scottish Claymore Sword
Ref. 50589
Claymore functional sword with an excellent balance. SHARP BLADE. Made of springsteel 60CrMnA with a hardness of 48-52 HRC. Blade width at tip 3,25 cm, blade thickness at tip 0,40 cm
Practical Mortuary hilt Sword
Ref. 50622
The blade is crafted in 1065 high-carbon steel, hardened to 50HRC, which reduces edge-notching to acceptable levels while providing resilience and protection against brittleness.
Torino Functional Rapier
Ref. 50624
Functional rapier sword for fencing from the 17th century. High quality carbon steel blade with excellent balance. Total length 115 cm. length of the blade 93 cm. weight 1.05 kg. Width at guard 1,90 cm. at tip 1,02 cm. Thickness at guard 0,64cm. at tip 0,25 cm.
Norman Single-Hand Sword with scabbard
Ref. 50627
The grip is permanently mounted and the tang is riveted for safety. The blade is fullered for balance and features 1/16" edges and a rounded tip.
Scimitar
Ref. 50628
The deeply curved blade of the Scimitar recalls battles between the Saracen and Crusader. The hardwood grips and hawksbill pommel are typical of the originals and create the perfect balance that makes this piece essential equipment for Eastern dance practitioners.
Lionheart Functinal Sword
Ref. 50630
Lionheart functional sword of carbon steel 1566 with a wooden handle covered in leather. SHARP BLADE. Total length 85 cm. blade 69 cm. handle 16 cm. weight 1130 gr. Includes scabbard.
Henry V functional sword
Ref. 50631
One-handed functional medieval sword Henry V with a leather-wrapped wooden scabbard. SHARP BLADE of carbon steel of 70 cm. Total length of the sword 87.5 cm. blade width 4.6 cm. weight 1,3 kg.
Functional Agincourt Sword
Ref. 50632
Functional medieval sword Battle of Agincourt. SHARP BLADE of carbon steel 1566 with an antique finish, 70 cm long. 20 cm leather-wrapped wooden hilt. Weight 1130 gr. Total length 90 cm. Includes scabbard.
Tinker Bastard Sword - Sharp
Ref. 50636
Hand and a half fully functional and SHARP medieval sword. Made of carbon steel 5160 and with a hardness of 50-52 HRC. Total length 109 cm. blade 85 cm. weight 1,2 kg. Includes scabbard.
Norman One-Handed Sword, practical blunt
Ref. 50557
The hand-forged spring-steel blade is oilhardened and well tempered to a Rockwell hardness of approx. 48-50 HRC. It´s forged up to the tang and peened with the pommel. The wooden grip is wrapped with leather-lace. The guard is forged from mild-steel. The blade has got a distinctive fuller which offers both flexibility and a lesser weight. The edges are...
Medieval One-handed sword with leather...
Ref. 50559
The forged blade of EN45 spring steel is oilhardened and well tempered to a Rockwell hardness of approx. 48-50 HRC. It´s hand-forged up to the tang and peened with the disc shaped pommel. The wooden grip is wrapped with leather and bordered by two steel rings. The straight crossguard is forged from mild-steel. The blade has got a distinctive fuller which...
Falchion with leather scabbard, practical...
Ref. 50562
The hand-forged spring-steel balde is oilhardened and well tempered to a Rockwell hardness of approx. 48-50 HRC. It´s forged up to the tang and peened with the pommel. The wooden grip is wrapped with leather-lace. The Guard is forged from mild-steel. The blade has got a distinctive fuller which offers both flexibility and a lesser weight.
One hand combat sword
Ref. 50724
Functional one hand combat sword, made of high carbon steel 1095 with full tang. The wooden handle is covered with leather. It includes scabbard. Total lenght 100 cm, blade 82 cm, blade width 5 cm and blade thickness 3,3 mm.
Practical Rapier sword.
Ref. 50725
Rapier combat sword in carbon steel 1095. It includes scabbard. Total lenght 108 cm, blade 92 cm, blade width 1,5 cm and blade thickness 3 mm.
Two hands combat sword
Ref. 50726
Two hand combat sword. Carbon steel 1095 made. It includes scabbard. Total lenght 104 cm, blade 97 cm, blade width 5 cm and blade thickness 3 mm.
Bastard combat sword.
Ref. 50728
Medieval combat sword handmade. The wooden handle is covered with leather. It includes wooden scabbared covered with leather.
Two hands medieval combat sword.
Ref. 50729
Two hand and half Practical medieval sword. Wooden handle wrapped in leather. The tip of the blade is rounded and blunt edge.
Hand and a half XV century Practical sword .
Ref. 50730
Hand and a half funtional medieval sword. Handmade, it includes wooden scabbared covered with leather.
One hand and half Practical italian sword.
Ref. 50731
One hand and half Practical italian sword. Wooden handle wrapped in leather. The tip of the blade is rounded and blunt edge. It includes wooden case lined in leather.
Crusaders combat sword.
Ref. 50732
Crusaders medieval Practical sword, hand-forged with wooden handles covered in leather. It includes wooden sheath lined with leather.
Viking sword with scabbard practice
Ref. 51203
Functional viking sword for practice. The blade is made of EN45 steel with a hardness of 48-50 HRC. Blade length: 79.5 cm. Width max. of the blade: 55 mm. Includes leather sheath covered with leather. Total length: 95 cm. Leather lined handle.
St. Maurice sword XIII century practice
Ref. 51204
Functional swordof S.XIII St. Maurice for practices. The blade is made of EN45 steel, blade length: 79.5 cm. Includes sheath made of wood and leather cover. Total length: 95 cm.
Functional sabre USA Navy
Ref. 51661
This sabre is an excellent functional reproduction of the Cutlass that in 1860 the United States incorporated into its arsenal. It has a hand forged high carbon steel blade 1065 and a brass basket hand-guard. Includes wooden scabbard covered in leather with metallic decoration.
Functional Gladius Maintz
Ref. 51633
Functional Gladius with ivory imitation grip and high carbon steel blade. Includes wooden scabbard covered in leather with brass decorations.
Functional Stiklestad Viking Sword
Ref. 51657
The battle of Stiklestad was the final battle of San Olaf. This Viking sword is a replica of one used by Olaf. The blade is made of 1065 carbon steel. Pommel and guard decorated in copper. The wooden grip is covered with leather. Includes a stylish matching scabbard. It is a very balanced and effective, yet attractive weapon.
Functional sword Excálibur
Ref. 51636
Functional sword Excálibur with high carbon steel blade, well balanced and tempered. Scabbard included.
Fuctional Small Italian Sword
Ref. 51638
Functional small Italian sword with elegant steel hilt and grip wrapped in wire cord for a perfect grip. Includes scabbard.
Functional Sword Kingdom of Heaven
Ref. 51639
Functional sword with hand forged high carbon steel blade. Pommel and crossguard plated in sterling silver. Hardwood grip with details in leather and brass wire. Translucent red cross embedded in the pommel.
Functional Scimitar
Ref. 51655
Functional scimitar or shamshir with curved blade made of high carbon steel 1065, not sharpened. The hilt is made of wood and the guard of steel. Includes wooden scabbard covered in leather with steel trims.
Functional German Hunting Sabre
Ref. 51632
German functional sabre from the year 1600 used for hunting wild boar and deer. Well balanced and tempered, blade of carbon steel 1065. Includes wooden scabbard covered in leather.
Functional Sword Baron
Ref. 51623
The long blade is made of fully hardened high carbon steel and the solid parts are also made of steel joined with a wooden, cord and leather grip. Although light enough to be balanced with one arm, this sword really stands out when used with both hands. It includes scabbard.
Functional sword Maltese cross
Ref. 51640
Functional sword decorated with the Maltese cross. Very well balanced, hand forged high carbon steel blade. Wooden scabbard covered in leather with steel fittings.
Functional Broadsword Claymore
Ref. 51635
Replica of the sword held by the Bruce clan. The long blade is fullered with a flattened cross section and is fully tempered high carbon steel. The long grip is wood wrapped in cord for a good grasp.
Functional Braveheart Claymore
Ref. 51626
Two-handed sword with high carbon steel blade. The grip and top of the blade are covered in leather. Total length 155 cm.
Medieval sword Pendragon
Ref. 51643
Medieval sword Pendragon. Inspired by the tales of King Arthur and the Knights of the Round Table. Hand forged high carbon steel blade. Gold-plated pommel and guard.
Functional Sword Prince Tancred
Ref. 51660
Functional replica of the sword of Tancred, Prince of Galilee (known in French as Tancrède de Hauteville). The pommel has on one side the red Nurit known as the flower of Galilee, and on the other side it is adorned with the cross of the Crusaders, which Tancred adopted during the Crusades. The wooden grip is covered with brown leather, with antique brass...
Functional Templar Sword William
Ref. 51664
Around 1066 A. D. Normans invade Britain led by William "The Conqueror", the first Norman king of England. This functional sword with forged blade in 1065 high carbon steel has a pommel with William´s battle cross engraved on it. The Cross also appears along the blade. The sturdy wooden grip is covered in dark red leather and surrounded by a silver...
Functional Half-and-a-Hand Sword
Ref. 51624
This sword is very large but, at the same time, it is incredibly light and very well balanced. The wide blade is forged from high carbon steel. The pommel and guard have an aged finish. It has a large 17 cm grip wrapped in black leather with a steel spacer ring that easily fits both hands. Includes scabbard with steel ornaments.
Accolade Knight Templar Sword
Ref. 51621
This Templar sword has a hand-forged carbon steel blade. The pommel has a very detailed Templar coin on each side with a Latin inscription and symbols representing the Order. The handle is lined with red leather. It includes a leather-lined wooden scabbard and a belt with metal decoration.
Functional Viking Sword 10th Century
Ref. 51987
Functional Viking Sword made of EN45 carbon steel. It is not sharpened and the tip is rounded. It supports combat with other swords of the same category but may be damaged if used with category A swords. Includes wooden scabbard covered with leather.
- 1
- 2
High quality, well-balanced carbon steel swords, but not as hard as category A swords. They withstand well controlled combat without strong blows, but they should be used with swords of the same hardness, as they can be damaged in a fight with a harder blade.
- The minimum hardness is 48 HRC.
- They have a full tang, bolted or welded to the handle.
- Unsharpened and with a rounded edge.
- Light and easy to handle with a well balanced centre of gravity.