Battle Ready Medieval Helmets 

per page

Ref. 50451

41,04 €
Available: Immediate Shipment

Simple plume with metal frame for Roman helmets. The plumes can be fixed on the helmets by using our plume-holders for Centurio or Optio.

Ref. 2245-LOR

94,60 €
Available: Immediate Delivery

Functional medieval helmet made of steel 1 mm with adjustable inner leather lining and chin strap, wearing chainmail for shoulder and neck protection.

Ref. 25139-LOR

149,99 €
Available: Immediate Delivery

Norman functional medieval helmet made of 1.3 mm steel with adjustable inner leather lining and chin strap, wearing chain mail for shoulder and neck protection.

Ref. 2267-LOR

153,65 €
Available: Immediate Delivery

Functional Spanish morrion made of 1.30 mm thick steel, it has an adjustable leather lining inside and a chin strap.

Ref. 50441

102,64 €
Available: Immediate Delivery

Authentic replica of a 1st century Roman helmet based on a find in Augsburg, Germany.

Ref. 50449

18,92 €
Available: Immediate Shipment

This plume holder is suitable for three Roman helmets of Deepeeka: Imperial Gallic ´H (n. 50441)´. It is used to attach the plume straight from back to front, as was customary for the Roman Optio soldier.

Ref. 50483

50,00 €
Available: Immediate Shipment

Medieval helmet in polished steel 1mm thick and leather belt. Used by the plebs. It includes foam pad.

Ref. 50484

47,00 €
Available: Immediate Delivery

Medieval helmet polished steel 1mm thick and belt.

Ref. 50485

88,15 €
Available: Immediate Delivery

Viking medieval helmet in polished steel chainmail, 1mm thick and leather strap. It includes foam pad. 67 cm in circumference.

Ref. 50425

55,33 €
Available: Immediate Delivery

Such helmets were worn by Vikings as well as by Normans and early crusaders, usually along with a chain mail coif. This helmet is made of approx. 1 mm thick steel und has an adjustable leather liner with chin strap. 

Ref. 50436

164,46 €
Available: Immediate Shipment

The helmet is made of 2 mm thick steel plate driven by hand, riveted and welded and ensures good protection due to its robustness during battle reenactment. The helmet has a folding up visor and two also hinged bracket in the neck or chest area. In addition, the helmet has a comfortable, padded fabric inlay and a chin strap of leather.

Ref. 3932

102,64 €
Available: Immediate Shipment

Made from elaborately worked and riveted 1.6 mm steel. Delivery includes screws and holes in the helmet for assembly at home, as well as leather lining and chin strap.Made from elaborately worked and riveted 1.6 mm steel. Delivery includes screws and holes in the helmet for assembly at home, as well as leather lining and chin strap.

Ref. 50450

18,92 €
Available: Immediate Shipment

This plume holder is suitable for three Roman helmets of Deepeeka: Imperial Gallic ´H (n. 50441)´. It is used to attach the plume across the helmet left to right, as was customary for the Roman Centurio soldier.

Ref. MV002/H13.03

215,00 €
Available: Immediate Delivery

Functional cap made of high quality steel, lined with leather inside for fit and comfort.

Ref. 2222PL-LOR

108,68 €
Available: Immediate Delivery

Reproduction of the helmet of S.XI Olmutz known as nasal helmet. Made of 2 mm thick steel and lined with adjustable leather and chin strap with buckle.

Ref. 2248-LOR

149,99 €
Available: Immediate Delivery

Functional bacinete with visor for battle made of 1.6 mm steel, is a replica of the bacinete of the 14th century and has a high quality adjustable leather inner lining.

Ref. 2282-LOR

141,90 €
Available: Immediate Delivery

Functional Italian bacinete at the end of the 15th century, made of 1.4 mm thick steel with inner padding and leather chinstrap.

Ref. 50392

149,54 €
Shipping in 20 working days

Manufactured from elaborately worked and riveted steel.

Ref. 50393

164,37 €
Shipping in 20 working days

Typical helmet shape with nasal protection and chain maille aventail for protection of neck and shoulder. Manufacted from elaborately worked and riveted steel.Typical helmet shape with nasal protection and chain maille aventail for protection of neck and shoulder. Manufacted from elaborately worked and riveted steel.Typical helmet shape with nasal...

Ref. 50394

109,71 €
Shipping in 20 working days

The long nasal is handmade from approx. 4 mm strong steel to withstand even the strongest strokes. It is riveted to the calotte. Both halves are welded together. Furthermore four strap fittings (Spangen) are riveted to the helmet to strengthen it. This manufacture ensures high robustness and good protection in battle. 

Ref. 50438

119,60 €
Shipping in 20 working days

The helmet and visor are driven from 1.6mm steel and is closed in front with a leather strap with authentic brass buckle. The visor is locked by means of forged hooks. The helmet is covered in the inside part with a soft cloth upholstery.

Ref. 50400

61,50 €
Shipping in 20 working days

Replica in the style of an early medieval clasp helmet with nasal, ideal for LARP, theater and costuming. This helmet is made by hand, helmet shell, cheek and neck protection are driven by hand and riveted together. The helmet has a high-quality, adjustable leather liner and chin strap with buckle.

Ref. 50405

76,93 €
Shipping in 20 working days

Reconstruction of a typical joust-helmet with klappvisor, around 1520 AD. Made from elaborately worked and rivetedsteel.

Ref. 50406

67,68 €
Shipping in 20 working days

The helmet comes with a comfortable, adjustable leather liner and chin-strap with buckle. Due to it´s little weight this helmet is perfectly for LARP and medieval re-enactment.The helmet comes with a comfortable, adjustable leather liner and chin-strap with buckle. Due to it´s little weight this helmet is perfectly for LARP and medieval re-enactment.The...

Ref. 50409

82,07 €
Shipping in 20 working days

A very comfortable adjustable leather lining with chin strap and buckle is included. 

Ref. 50412

102,64 €
Shipping in 20 working days

This reconstruction has been made by handcraft and is strictly following the example. It’s got the same slim cut, the same pronounced comb and the decorated rivets.The helmet has a high-class, adjustable leather inlay and is covered with leather inside.This reconstruction has been made by handcraft and is strictly following the example. It’s got the same...

Ref. 50416

82,07 €
Shipping in 20 working days

The brim and intersecting, wavy steel strips are riveted to the helmet bell. This consists of two parts, the center was welded. Although the thickness of the material "only" 1.6 mm is the helmet to designate well as battle-ready.

Ref. 50417

129,58 €
Shipping in 20 working days

The helmets were mainly used by foot soldiers and pikemen, later also by household troops and town watches. Still the bodyguards of the Pope, the Swiss Guards are wearing Morions. The helmet has a comfortable, adjustable leather liner and a strong chin-strap with buckle. The liner is fixed by decorative brass rivets. The helmets were mainly used by foot...

Ref. 50419

108,82 €
Shipping in 20 working days

Battle-ready reconstruction of a late-medieval pot helmet.

Ref. 50420

102,64 €
Shipping in 20 working days

The helmet is made from 1.6mm strong steel and featured with an adjustable leather liner.

Ref. 50421

61,61 €
Shipping in 20 working days

This wearable helmet is based on historical originals.It is made from 1.6 mm armour steel. The kettle hat has a leather inlay.

Ref. 50422

139,56 €
Shipping in 20 working days

Our version is made from steel with brass brackets. The neck guard is made from brass scales mounted on suede leather. The jowl flaps are also made from brass.

Ref. 50423

159,53 €
Shipping in 20 working days

The helmet consists of four segments which are combined with clasps and a helmet comb. It has flexible cheek and butt flaps, which are covered with leather inside and at the edges. It also has a short riveted nasal. As well as the original this helmet is handmade and riveted with brass rivets.The helmet has a comfortable leather liner.The cheek flaps can...

Ref. 50424

149,54 €
Shipping in 20 working days

It is decorated with engravings and brass applications, and includes a galvanised, butted aventail.

Ref. 50426

82,07 €
Shipping in 20 working days

The helmet is comparatively high, and surrounded by a narrow rim. It was popular amoung foot soldiers throughout the 17th century.

Ref. 50427

82,07 €
Shipping in 20 working days

Typical Italian Barbute helmet shape circa 1440 AD. Made from elaborately worked and riveted 1.6 mm steel.Typical Italian Barbute helmet shape circa 1440 AD. Made from elaborately worked and riveted 1.6 mm steel.Typical Italian Barbute helmet shape circa 1440 AD. Made from elaborately worked and riveted 1.6 mm steel.Typical Italian Barbute helmet shape...

Ref. 50428

70,97 €
Shipping in 20 working days

Typical helmet shape with brass fittings. Made from elaborately worked and riveted steel with brass ornamentation.

Ref. 50429

56,36 €
Shipping in 20 working days

Typical helmet shape with brass fittings.12th - 13th century. Made from elaborately worked and riveted steel with brass ornamentation.Typical helmet shape with brass fittings.12th - 13th century. Made from elaborately worked and riveted steel with brass ornamentation.Typical helmet shape with brass fittings.12th - 13th century. Made from elaborately...

Ref. 50430

60,48 €
Shipping in 20 working days

This replica follows an original Morion helmet from the second half of the 16th century.Delivery includes a leather inlay with chin strap.This replica follows an original Morion helmet from the second half of the 16th century.Delivery includes a leather inlay with chin strap.This replica follows an original Morion helmet from the second half of the 16th...

Ref. 50431

71,79 €
Shipping in 20 working days

This helmet is "only" made from 1.6 mm steel. However, the riveted steel bands give the kind of protection necessary for battle reenactment. Delivery includes a comfortable leather inlay, chin strap and buck.

Ref. 50432

92,36 €
Shipping in 20 working days

This helmet replica follows originals from the 13th century. The "Great Helmet" was often worn over a smaller, lighter helmet (for example secret helmet). 

Ref. 50433

139,56 €
Shipping in 20 working days

Attractive reconstruction of a crusader great helm from ca. 1180 a.d., also called pot helm, bucket helm and barrel helm. There is a very comfortable leather inlay included, as well as a chin strap with buckle. 

Ref. 50434

164,46 €
Shipping in 20 working days

Replica of a northern Italian sallet from approx. 1490 a.d..Including klapp-visor. Handmade from 1.6 mm steel. Delivery includes a high-quality, adjustable leather inlay with chin strap.Replica of a northern Italian sallet from approx. 1490 a.d..Including klapp-visor. Handmade from 1.6 mm steel. Delivery includes a high-quality, adjustable leather inlay...

Ref. 50435

147,64 €
Shipping in 20 working days

Our replica has a very comfortable, padded Inlet and a chin strap of leather.

Ref. 50437

164,46 €
Shipping in 20 working days

At the bottom our reconstruction has drilled brass buttons where an aventail easily can be attached. The helmet is equipped with an artfully and hand-driven visor from 2mm steel. Both helmet-halves are hand-driven from 2mm strong steel sheet, cleanly welded and polished.

Ref. 50444

162,75 €
Shipping in 20 working days

Typical Corinthian helmet shape with horse hair plume. Made of brass.

Ref. 50445

102,64 €
Shipping in 20 working days

Achilles (as played by Brad Pitt) wore a similar helmet in the movie "Troy." This helmet is ideal for LARP, theatre and costuming.Achilles (as played by Brad Pitt) wore a similar helmet in the movie "Troy." This helmet is ideal for LARP, theatre and costuming.Achilles (as played by Brad Pitt) wore a similar helmet in the movie "Troy." This helmet is ideal...

Ref. 50448

174,14 €
Shipping in 20 working days

This complex replica follows the example of helmets worn at about 300 BC in ancient Athens. The flexible cheek guards are covered with leather at the inside. The plume can separately be mounted.This complex replica follows the example of helmets worn at about 300 BC in ancient Athens. The flexible cheek guards are covered with leather at the inside. The...

Showing 1 - 48 of 77 items

These functional helmets are made of high quality steel and lined with leather for a better fit.