Battle Ready Medieval Shields 

Ref. 50658

109,61 €
Available: Immediate Shipment

There is a handle inside the boss. The shield is reinforced with wooden slats on the back.

Ref. 50659

56,57 €
Available: Immediate Shipment

This heather shield is hand-made from approx. 10 mm thick plywood. The outer cover is canvas and on the back-side you find a soft, leather-covered arm-padding. 

Ref. 3935

61,50 €
Available: Immediate Shipment

With steel boss and steel fittings. The edge of the shield is protected by a steel ring. There is an arm loop and a fist grip made of steel.With steel boss and steel fittings. The edge of the shield is protected by a steel ring. There is an arm loop and a fist grip made of steel.With steel boss and steel fittings. The edge of the shield is protected by a...

Ref. 50509

129,58 €
Available: Immediate Shipment

This shield is made of wood, with steel boss (so-called Umbo) and hand-painted linen cover on the front side.It is reinforced with thin wooden slats on the back.The carrying handle is lodged behind the boss. This shield is made of wood, with steel boss (so-called Umbo) and hand-painted linen cover on the front side.It is reinforced with thin wooden slats...

Ref. 50549

49,16 €
Available: Immediate Shipment

Essentially, a Buckler is a small shield about the size of a large dinner plate. It often accompanied a swordsman as an aid in defense. The Cold Steel training replica is stoutly made and has a thick, sturdy, raised boss to protect the hand, and a rugged handle that will withstand plenty hard of use. 

Ref. 51962

174,14 €
Available: Immediate Shipment

Battle-ready round shield made of wood with strong steel fittings. A typical, very elaborate knot design has been engraved by complex handcraft into a steel plate in the middle. On the backside has riveted padding covered with soft leather. Two leather straps are riveted as well, of which one is long and adjustable for wearing at the arm or at the back.

Ref. 50224

227,60 €
Shipping in 7 working days

Templar cross functional shield. Size 60 x 50 cm.

Ref. 4038

227,60 €
Shipping in 7 working days

Hospitalario functional shield. Size 60 x 50 cm.

Ref. 50496

51,22 €
Shipping in 20 working days

Functional shield primed in white to paint to your taste. Made of laminated wood. At the back it has four leather straps for grip. Height 68 cm, width 51 cm, thickness 1,2 cm, weight 1,5 kg.

Ref. 50497

51,22 €
Shipping in 20 working days

Functional steel shield to be painted to your taste. Primed with rust-resistant red paint. At the back it has a handle for grip. Height 68 cm, width 50 cm, thickness 1.2 mm, weight 3.3 kg.

Ref. 50501

82,07 €
Shipping in 20 working days

Steel kite shield, primed with antioxidant paint ideal for making your own custom-designed shield. At the back it has a strap to carry it on the shoulder. Height 136 cm. width 63 cm. weight 5 kg. thickness 1,3 mm.

Ref. 50504

129,58 €
Shipping in 20 working days

Made of varnished wood with boss and a riveted cross made from steel.The shield has 5 leather straps for carrying comfort.Made of varnished wood with boss and a riveted cross made from steel.The shield has 5 leather straps for carrying comfort.Made of varnished wood with boss and a riveted cross made from steel.The shield has 5 leather straps for carrying...

Ref. 50507

76,93 €
Shipping in 20 working days

With steel boss and steel fittings.The edge of the shield is protected by a steel ring.There is an arm loop and a fist grip made of steel.With steel boss and steel fittings.The edge of the shield is protected by a steel ring.There is an arm loop and a fist grip made of steel.With steel boss and steel fittings.The edge of the shield is protected by a steel...

Ref. 50661

129,58 €
Shipping in 20 working days

Wooden round shield with steel boss and fittings, approx. 1.2 mm steel. The back side is covered in fabric. The fist grip ist made of steel, padded and wrapped in suede leather. Wooden round shield with steel boss and fittings, approx. 1.2 mm steel. The back side is covered in fabric. The fist grip ist made of steel, padded and wrapped in suede leather....

Ref. 50508

129,58 €
Shipping in 20 working days

Wooden round shield with steel boss and fittings, ca. 1,2 mm steel.The back side is covered in fabric. The fist grip ist made of steel, padded and wrapped in suede leather. Wooden round shield with steel boss and fittings, ca. 1,2 mm steel.The back side is covered in fabric. The fist grip ist made of steel, padded and wrapped in suede leather. Wooden...

Ref. 50510

119,60 €
Shipping in 20 working days

Norman Kite shield made of plywood, covered with canvas. The shield is painted with a green-yellow artwork which can be seen in the Bayeux tapestry. 

Ref. 50657

92,36 €
Shipping in 20 working days

Shield with handle and leather cover on the back side.

Ref. 50660

199,47 €
Shipping in 20 working days

Reconstruction of a typical Shield of the Roman legionaire, made of wood with a brass edging and fixed steel umbo (boss). The front is covered by hand-painted linen. The back side is reinforced with narrow wooden slats.

Ref. 50662

164,37 €
Shipping in 20 working days

It features a brass shield boss in the center, decorative brass rivets and beautiful celtic ornaments embossed in the leather. The Targe is manufactured with hand dyed natural leather which is fixed by brass rivets. 

Ref. 51273

129,58 €
Shipping in 20 working days

Round wooden shield with 1.2 mm steel pieces. The grip of the cuff is made of steel, padded and lined in suede leather. Diameter: 55 cm.

Ref. 51322

119,60 €
Shipping in 20 working days

Round wood Viking shield 13 mm. thick and painted with Nordic horses. There are four decorative elements made of brass in the center and there is a hook made of solid wood on the back. The edge is lined with leather

Ref. 52432

160,00 €
Shipping in 10-15 working days

Ref. 2101MS-LOR

129,99 €
Shipping in 4-6 weeks

Functional Roman shield called Scutum and used by the Roman legions. It has measures of 89 cm x 52 cm, behind it has a hand grip, it is made of 1.2 mm steel and hand painted.

Ref. 2101-LOR-OF

77,99 € 129,99 € -40%
Out of stock

Functional Roman shield with slight imperfections or friction due to product from exposures, manufacturing or transport defects,Functional Roman shield called Scutum and used by the Roman legions. It has measures of 89 cm x 52 cm, behind it has a hand grip, it is made of 1.2 mm steel and hand painted.

Add to cart

Ref. 2099-LOR

85,80 €
Shipping in 4-6 weeks

Functional carbon steel shield with white finish to paint and customize to your liking. Ideal for LARP or historical recreation, its measures are 52 wide x 70 cm high, behind it has a grip handle.

Ref. 50663

88,35 €
Shipping in 20 working days

Handmade from 2mm sheet steel this shield with bordered edges, a comfortable back-padding and a solid grip is an excellent protection. The front side is polished and can be painted with own coats of arms.

Ref. 51663

160,00 €
Shipping in 10-15 working days

This Viking shield with a dark brown finish is decorated with steel pieces, the highlighted decoration in the centre as well as the decorative strips and the rim of the shield, all of them bolted. The back is covered with felt and has a holding strap.

Ref. 50656

61,50 €
Shipping in 20 working days

Decorative wooden round shield with fittings from steel.At the backside the shield is covered with leather. Two leather straps are riveted.Decorative wooden round shield with fittings from steel.At the backside the shield is covered with leather. Two leather straps are riveted.Decorative wooden round shield with fittings from steel.At the backside the...

Showing 1 - 28 of 28 items

Functional shields are generally made of wood covered with canvas. Some of them are not painted, so they can be customized.